• (0)
  • Basket
  • 0.00

PAWO F7S

£0.00

Special full steel rope with IWRC

Based on the PAWO F7 the PAWO F7S was developed. The fibre component of the F7 steel core was replaced by a steel strand, thus achieving an even higher metallic cross-section plus an even higher breaking strength. This full steel rope is primarily used in installations where the rope service life is more affected by the impact of permanent bends than by wear from the traction sheave. The steel wire rope core minimizes rope elongation in comparison to the types F3 and F7. As a consequence, the rope is particularly suitable for high-rise applications with many bending cycles.


Properties

Medium and high-rise
Intermediate to high number of bending cycles
Normal to heavy usage levels
Low stretch
Long service life

Construction

8 x 19 Warrington with steel wire rope core, regular lay,
Technical terms of delivery to DIN EN 12385, ISO 4344
Load-bearing wires in the outer strands: 152
Tensile grade 1570 N/mm
2, steel wire bright or galvanized


rope-Ø (permissible tolerance)
no load:with load (10% of Fmin)
max. 3% < 10 mmmin. -1% <= 10 mm
max. 2% > 10 mmmin. -1% > 10 mm

rope diameter (mm)calculated mass (kg/m)min. breaking load (kN)part-no.
80,28044,6631208033
90,35656,0631209032
100,43669,5631210033
110,52883,1631211032
120,62898,9631212032
130,727116,0631213033
140,857134,8631214031
150,972152,8631215032
161,105176,1631216032
181,388218,6631218031
191,555245,2631219031
201,718270,8631220031

Quantity

Make Enquiry