Special rope with steel-reinforced fibre core for elevators.
For many years our elevator rope works standard PAWO F3 has a proven history in many types of traction elevator applications. The outer strands are designed in Seale construction. The 9 thicker wires of the outer strand layer offer a higher wear resistance. The rope is primarily used where the service life is more defined by wear due to contact with the traction sheave then by rope fatigue due to bending deformations of the rope cross-section can be greatly reduced. The fibre content in the core of the steel wire rope works as a lubricant reservoir.
Low and mid-rise
Small to intermediate number of bending cycles
Normal to heavy usage levels wear-resistant
Low elongation extended service life
8 x 19 Seale with steel-reinforced fibre core, regular lay,
Technical terms of delivery to DIN EN 12385, ISO 4344
Load-bearing wires in the outer strands: 152
Tensile grade 1570 N/mm², steel wire bright or galvanized.
|rope-Ø (permissible tolerance)|
|no load:||with load (10% of Fmin)|
|max. 3% < 10 mm||min. -1% <= 10 mm|
|max. 2% > 10 mm||min. -1% > 10 mm|
|rope diameter (mm)||calculated mass (kg/m)||min. breaking load (kN)||part-no.|